Oil IGP-38
# N /A
Description
Oil IGP-38 is the working fluid in hydraulic systems of machine tools, automatic transfer lines, presses, primarily of the modern domestic and imported equipment.
Applications
Oil IGP-38 is used for lubricating the high-speed transmission, CVT, electromagnetic toothed clutch, the bearing assemblies, sliding guides and the rolling elements in the other units and mechanisms, where oils with improved antioxidant and antiwear properties.
Specifications
| Indicator | Norm |
|---|---|
| Appearance | Homogeneous transparent liquid |
| Density at 20 ° C, kg /m3 and not more than | 890 |
| Kinematic viscosity, at 40 ° C, mm2 /s | 55-65 |
| Viscosity index, not less than | 90 |
| Flash point open cup, ° C, min | 210 |
| Pour Point, ° C, max | -15 |
| Mass fraction of zinc,%, at least | 0,04 |
| Mass fraction of sulfur,%, not more than | 1,0 |
| Color on colorimeter CNT, units of CNT, not more than | 4,0 |
| The tendency to foaming cm3, not more than: | |
|
50 |
|
50 |
|
50 |
|
50 |
| Anti-corrosion properties: degree of corrosion | The lack |
| Acid number, mg KOH per 1 g of oil, not more than | 1,0 |
| Saponification number, mg KOH per 1 g of the oil within | 0,8-2,5 |
| aging in hot condition: increase of acid value after the oxidation, mg KOH per 1 g of oil, not more than | 0,35 |
| thermooxidative stability: increase in acid value, mg KOH per 1 g of oil, not more than |
0,5 |
| The water content | Tracks |
| Content of mechanical impurities | The lack |
| Ash content,%, not more than | 0,2 |
| Coking ability,% | is not normalized |
| The stability of foam, cm 3, not more than | |
|
5 |
|
5 |
|
5 |
|
5 |
Additional information
| Страна | |
|---|---|
| appointment | |
| State of aggregation | |
| Type (manufacturing technology) |
