Oil diffusion vacuum PPMS

vacuum oil

SKU: 59551232 Category:

Description

Silicone fluid (silicone) vacuum more uniform liquid composition and can withstand prolonged heating in air to a temperature of 150 ° C.

Advantages

  • Minimized backflow: vapor pressure of a single-component silicone fluid is so low that the use of traps or traps existing cooling is no longer necessary for many applications
  • .

  • Longer operation: thermal and chemical stability of silicone fluids allows them to work very long period without deterioration or contamination
  • .

  • cleaning systems (filters), low maintenance costs low vapor pressure liquids at temperatures silicone retraction results in a reduction in fluid loss. The internal pump surfaces are kept clean; silicone fluids do not decompose and create a virtually trouble-free work environment.
  • Fast circulation, reducing downtime, decreased frequent replacement fluid: silicone fluids coefficient recovery after exposure to air and temperature many times faster than the organic liquids. Time is saved between cycles due to the outstanding resistance of Dow Corning silicone fluids to oxidation and hydrolysis, which allows cooling without the vacuum pump.

Technical Specifications






























Indicator


Norm

Appearance


Colorless transparent liquid

Mechanical impurities


No

Kinematic viscosity at 20 ° C, cSt


15 -19

The pH of the aqueous extract


6-7

silicon content,%


23,9-24,7

Mass fraction of the basic substance (linear pentasiloksana)%, at least


84

Mass fraction of impurities,%, not more, including
-. Mass fraction of impurities boiling below the base material (cis and trans metiltsiklosiloksanov) without more
– mass fraction of impurities boiling above basic substance (disiloxane, cyclotetrasiloxane, linear hexasiloxane), not more than



1

15

Limiting residual pressure in mm Hg. Art., no more than


4 * 10-6

Autoignition Temperature ° C


430

Electric strength at 15-35 ° C, kV /mm


40-66

Volume resistivity at 15-35 ° C, Ohm * cm


(0,56-2,1) * 1013

Dielectric loss tangent at 1 kHz and 15-35 ° C


0,00012-0,00025

Permittivity at 1 kHz and 15-35 ° C


2,7-2,8

Эта запись также доступна на: Ukrainian Russian Spanish

Additional information

Страна

A type

appointment

State of aggregation

Packaging