Oil AMG-10 (-50)
hydraulic oils
Description
Applications
Oil hydraulic AMG-10 (-50) – is intended for hydraulic systems of aircraft and ground vehicles, operating in the temperature range from -40 to +55 ° C. It is generated on the basis glubokodearomatizirovannoy nizkozastyvayushey fraction obtained from hydrocracking products and mixtures of paraffin oils consisting of naphthenic and isoparaffinic hydrocarbons. Contains thickening and antioxidant additives, special distinctive organic dye red.
Technical Specifications
| Indicator | Norm |
|---|---|
| Appearance | Clear liquid red |
| The color units. CNT, not more than | – |
| Kinematic viscosity mm2 /s: | |
| at 50 ° C, at least | 10,0 |
| at -40 ° C, no more than | – |
| at -50 ° C, no more than | 1250 |
| Acid number, mg KOH /g, not more than | 0,03 |
| Temperature, ° C: | |
| flash in the open crucible, not lower | 135 |
| pour point, not higher than | -50 |
| The stability against oxidation rates after oxidation: | |
| Kinematic viscosity mm2 /s: | |
| at 50 ° C, at least | 9,8 |
| at -50 ° C, no more than | 1500 |
| Acid number mg KOH /g, not more than | 0,08 |
| Change of acid value, mg KRN /g, not more than | – |
| Mass fraction of residue,%, not more than | The lack |
| The change in mass of rubber stamps UIM-1 after the test in oil,% | – |
| Viscosity index, not less than | – |
| Density at 20 ° C, kg /m3 and not more than | 875 |
| Content: | |
| water | The lack |
| solids | The lack |
Additional information
| Производитель | |
|---|---|
| Страна | |
| A type | |
| appointment | |
| State of aggregation | |
| Type (manufacturing technology) | |
| Packaging | |
| Manufacturer |
