oil PFC
anticorrosive materials
Description
Conservation oils PFC – all-season workers’ preservative oil with a high level of protection of surface properties. It creates a protective film
Applications
Preservative oil ASO is for the preservation and maintenance of small arms and exhibits superior protection at ambient temperatures from -50 to 50 ° C. Preservative oil ASO – multigrade worker and preservative oil with high levels of protective surface properties. It creates a protective film on the surface …
Oil K-17 is produced from a mixture of MC-20 aircraft and transformer T-1500U oils with the addition of oxidized petrolatum, rubber SKB-45 and additive composition.
Applications
Apply for the long-term (5 years or more) preservation of products, including spare parts from ferrous and nonferrous metals, stored without the direct influence of climatic factors. Internal combustion engines without dismantling conserved: staffing decanted oil, disable filters oil pumped K-17, excess oil is removed. Oil K-17 can be used as an additive to sour gas turbine fuels (0.002% in oil). This significantly reduces the corrosion of the fuel equipment engines and increases the turnaround time of their work.
Specifications
| Indicators physicomechanical properties | |
| Appearance | low-viscosity oily liquid |
| color | Dark Brown |
| Kinematic viscosity mm2 /s: | |
| at 100 ° C | – |
| at 50 ° C | & gt; = 8,0 |
| Temperature, ° C: | |
| flash open cup. not less than | 100 |
| pour point, not higher than | -55 |
| Mass fraction,%: | |
| ash | 0,05 |
| water | no |
| mechanical impurities, no more | – |
| TBN, mg KOH /g, at least | – |
| Acid number, mg KOH /g | – |
| Protective properties GOST 9.054-75 steel 10, the time until the first signs of corrosion cycles: | |
| at elevated humidity and temperature (T-4) Method 1 | 20 |
| under constant immersion in the electrolyte (seawater), Method 4 | 10 |
Additional information
| Страна | |
|---|---|
| appointment | |
| State of aggregation | |
| Type (manufacturing technology) |
