SC-1-06 Lubricants

Oil for slideways

SKU: 59552404 Category:

Description

Grease SK-1-06 soft white ointment with a smooth texture.

Applications

Applied lubricant SC-1-06 in the armature pipelines and threaded connections in some nodes of friction in contact with corrosive environments. SC-1-06 Lubricant purely chemically inert, compatible with virtually any ferrous and ferrous metals, rubbers, polymers, and alloys. Waterproof. Insoluble in acids, alcohols, alkalis, hydrocarbons, and others. The inert to strong oxidants such as fuming nitric acid and sulfuric acid to nitrogen oxides, chlorine, hydrogen peroxide, amines, hydrazine. Slightly soluble in ammonia. Soluble in Freon-113 or other low molecular weight fluorocarbon liquids. When the oxygen concentration to 50% Front pressurized to 100 MPa. In case of contact with oxygen on an exposed surface SC-1-06 lubrication at an oxygen pressure to 1.6 MPa is used without limitations. If the pressure reaches 16 MPa, the thickness of the open lubricant layer should not exceed 50 microns. According to the properties and purpose grease SK-1-06 close to the lubrication VNIINP-282, which in some cases can be used as its substitute.

Specifications


Indicator Norm
Appearance Homogeneous ointment from white to light gray. Presence of oil released from the grease
The viscosity at -20? C and an average gradient of the strain rate of 10 sec ?? in Pa • s to 1000
The viscosity at 50? C and an average strain gradienteskorosti 1500 ?? s in Pa • s Not less than 1,0
Content of mechanical impurities in% diameter larger than 0.075 mm The lack
Mass fraction of oil from the molded lubricant (colloidal stability), in% Not more than 10,0
Tensile shear strength at 50? C in Pa At least 100
Test of the corrosive action on metal plates:
a) Steel 45
b) M1 Copper
The Braves

Эта запись также доступна на: Ukrainian Russian Spanish

Additional information

Страна

appointment

State of aggregation

Type (manufacturing technology)