Description
Vacuum oil VM-5 used as a working fluid in the high-vacuum vapor jet pumps that operate at a residual pressure of 1 • 10? 3 to 1 • 10? 7 mm Hg. v.
Applications
Vacuum oil VM-5 used as the working fluid in the high-vacuum steam-pumps (providing a low residual pressure in the vacuum system as compared with vacuum oil BM-1 and BM-1C), as well as, in some cases, in mechanical pump with an oil seal between mating parts.
Benefits
-
It improves the sealing of the working chambers;
Reduces power losses due to friction;
The optimum viscosity for each case;
sufficiently low vapor pressure (it depends on the volatility of oil and achievable degree of vacuum);
Environmental security;
High hydrolytic stability evacuated vapor and air;
Small gazorastvorimost.
Specifications
Indicator | Norm |
---|---|
Kinematic viscosity, mm2 /s: at 20 ° C | – |
Kinematic viscosity mm2 /s: at 50 ° C | 60,0-74,0 |
Kinematic viscosity, mm2 /s at 100 ° C | – |
Acid number, mg KOH /g, not more than | 0,2 |
Temperature, ° C: flare in an open crucible, not lower | +230 |
Temperature, ° C: pour point not higher than | -12 |
Color CNT, not more than | 0,5 |
Fractional composition of oil, ° C: Temperature starting the distillation, not lower | – |
Fractional composition of oil, ° C 90% distilled oil at a temperature not above | – |
Vapor pressure at 20 ° C, Pas | not more than 2,7 · 10-5 |
Density at 20 ° C, kg /m3 and not more than | 900 |
Additional information
Способ_упаковки | |
---|---|
Производитель | |
Страна | |
Manufacturer | |
appointment | |
A type | |
State of aggregation | |
Type (manufacturing technology) | |
Packaging |