Главная страница » Catalog » Silicone fluid » PMS-10 oil (20L).
Description
Application
- The basis of heat-resistant anti-adhesion (separation) emulsions for molds in the manufacture of tires, rubber products (RTI), to lubricate the contact between the plastic and rubber.
- Basis lubricants friction metal-plastic systems, mechanical hardware.
- The basis of defoamers wide range of applications.
- High and low-temperature heat transfer fluids.
- the shock absorber, hydraulic damping and cooling liquid.
- Dielectrics.
- Plasticizers for various elastomers.
- In the production of household chemicals: paints, varnishes, lacquers, polishes and pastes
- In the production of cosmetics, pharmacology and medicine.
.
Advantages
- polymethylsiloxane (PMS) – transparent, colorless, chemically inert and corrosion-resistant fluid. Are dissolved in aromatic and chlorinated hydrocarbons are not soluble in lower alcohols and water. Polymethylsilicone liquids have hydrophobicity, and good dielectric properties and damping are surfactants.
- Pour liquid below -60 ° C. Polymethylsilicone liquid can be used at operating temperatures from -50 to + 200 ° C. Liquids with a flash point below + 200 ° C are used in open systems only at temperatures not exceeding the flash point.
- Unlike mineral or synthetic oils, polymethylsiloxane fluid have excellent electrical insulation, defoaming and anti-adhesion properties.
Specifications
Indicator | Norm |
Appearance | Colorless transparent liquid |
Content of mechanical impurities | No |
Kinematic viscosity at 20 ° C, m2 /s (cSt) | (9,2 – 10,8). 10-6 (9,2 – 10,8) |
Kinematic viscosity at -50 ° C, m2 /s (cSt), no more than | 0,5. 10-4 (120) |
Kinematic viscosity at -60 ° C, m2 /s (cSt), not more than | Do not detect |
Dynamic viscosity at -50 ° C, Pa.s (cps), no more | Do not detect |
Flash point open cup, ° C, min | 172 |
Pour Point, ° C, max | minus 65 |
reaction medium (pH of water extract) | 6,2 – 7,0 |
Mass fraction of silicon,% | 36,0 – 37,5 |
Water content,%, not more than | 0,004 |
The permittivity | 2,5 – 2,6 |
Additional information
Производитель | |
---|---|
Страна | |
appointment | |
State of aggregation | |
Type (manufacturing technology) | |
Packaging |