PMS-350 Fluid (5l.)
silicone fluid
Description
Liquid PMS – 350 – base heat-resistant anti-adhesion (separation) emulsions for molds in the manufacture of tires, rubber, for the lubrication of contact between plastic and rubber. Systems based lubricants friction metal-plastic, the mechanical apparatus. Basis defoamers wide range of applications. High and low temperature heat transfer fluids. Shock absorber, hydraulic damping and coolants. Dielectric. Plasticizer for the various elastomers. In the production of household chemicals, cosmetics, pharmacology and medicine.
Applications
- The basis of petrolatum paste in the form of an aqueous emulsion as release agents in the manufacture of rubber goods, plastic goods, conveyor belts, rubber in proizvostvo for treatment of glass containers;
- absorber, hydraulic, damping fluid in the production of cosmetics, as well as additives in lacquers and various household products;
- Silicone release agents for molds;
- water-repellent liquids;
- silicone oils and plastic (grease) grease;
- Silicone depreciation and damping fluid;
- Silicone heat transfer fluids and coolants.
Benefits
- Pour liquid below -60 ° C. Polymethylsilicone liquid can be used at operating temperatures from -50 to + 200 ° C. Liquids with a flash point below + 200 ° C are used in open systems only at temperatures not exceeding the flash point.
- Unlike mineral or synthetic oils, polymethylsiloxane fluid have excellent electrical insulation, defoaming and anti-adhesion properties.
Specifications
| Indicator | Norm |
| Density (g /cm3) | 0,97 |
| Viscosity at 25 ° C mm2 /s | 350 |
| Temperature, ° C: flare in an open crucible, not lower | 320 |
| Temperature, ° C: pour point not higher than | -50 |
Additional information
| Производитель | |
|---|---|
| Страна | |
| appointment | |
| State of aggregation | |
| Type (manufacturing technology) | |
| Packaging |
