COP Compressor Oil – 19p
# N /A
Description
Applications
Compressor oil KS-19 , intended for lubrication of reciprocating compressors, medium and high pressure blowers and rotary compressors, used in various branches of industry and transport where the equipment manufacturer specified the use of this oil viscosity grade.
Also recommended for single stage and multistage compressors that compress air and /or other gases, insoluble in the oil. Using unique base oils provides a high performance product.
Advantages
- It contains antioxidant additive that helps minimize oil;
- deposits in the injection lines compressors has good thermal stability;
- Ensures effective long oil operation;
- The high ignition temperature ensures safe operation;
- Compressors, oil acts as a sealing medium (compression chamber seals) lubricates the valve cylinders and protects parts from corrosion;
Specifications
| Indicator | Norm |
|---|---|
| Kinematic viscosity mm2 /s | |
|
at 100 ° C
| 18-24 |
|
at 40 ° C
| – |
| Viscosity index, not less than | 85 |
| Acid number, mg KOH /g, not more than | 0,03 |
| Temperature, ° C: | |
|
flash in the open crucible, not lower
| 260 |
|
zastyvniya not above
| -15 |
| Content,% (weight fraction.), No more than: | |
|
the water-soluble acids and alkalis
| no |
|
mechanical impurities
| no |
|
water
| no |
|
sulfur
| 1,0 |
|
selective solvents
| no |
| Coking ability,%, not more than | 0,45 |
| Ash content,%, not more than | 0,005 |
| The stability against oxidation, not more than: | |
|
precipitate,% (wt. Fraction)
| no |
|
an acid number mgKOH /g
| 0,5 |
|
increase in coking,%
| – |
|
evaporation losses,%
| – |
| Color units. CNT, not more than | 7,0 |
| Corrosion: | |
|
on plates of steel
| – |
|
on plates of lead, g /cm2, no more
| – |
|
on copper plates
| withstand |
|
on steel rods
| – |
| Density at 20 ° C, kg /m3 and not more than | 905 |
Additional information
| Страна | |
|---|---|
| appointment | |
| State of aggregation | |
| Type (manufacturing technology) |
